Assembly Instructions

(A) M8 Bolts
(A) M8 Bolts
(B) Big Washers
(B) Big Washers
Legs
(G) Headboard Mount
Mounting Block
(G) Headboard Mount
Wall
Top of the Headboard
(I) Screws x4
(I) Screws x4
(G) Headboard Mount
(H) Wall Mount
(J) Drywall Anchor x4
(if needed in step 3)
HEADBOARD ASSEMBLY INSTRUCTIONS
PARTS LIST:
(A) M8 bolts x4
(B) Big Washers x4
(F) Nuts x4
(H) Wall Mount x2
(G) Headboard Mount x2
(I) Screws x16
(J) Drywall Anchor x8
(K) Hex key 65mm
(L) Hex key 70mm
(D) M6 Bolts x4
(C) Wrench x1
(E) Small Washers x4
(A)
(B) (C)
(F)
(D)
(H)
(G)
(E)
Headboard
Bed Frame
(F) Nuts
(E) Small Washers
(D) M6 Bolts
STEP 1
Remove the headboard from the box and
lay it face down on the ground. Open the
velcro panel on the back and remove both
the legs and hardware.
STEP 2
Using two (A) M8 bolts, two (B) big washers
and the provided holes, secure both legs to
the headboard at your desired height with
the (L) hex key provided. (see Figure 1)
STEP 3
(recommended)
Using the mounting blocks on the back of your headboard,
screw the two (G) headboard mounts to the top of your
headboard with the provided (I) screws. Using the remaining
(I) screws, attach the (H) wall mounts to your wall. Make sure
to place the wall mounts at the correct height to pair with
your previously installed (G) headboard mounts (see figure
2). If no wall studs are available to secure the headboard to
your wall, use the provided (J) drywall anchors instead. Lift
the headboard and lower into place to join the (G) and (H)
mounts together.
STEP 4
With the front side of the headboard facing the bed frame,
attach the headboard to the frame using the (D) M6 bolts
and (K) hex key, (E) small washers and (F) nuts.
If your bed frame doesn’t fit the headboard, use the provided
modification plates to secure the bed frame to the headboard. More
instructions are included with the plates.
Figure 2
Figure 1
Figure 3
(I)
(J)
(K)
(L)
(G) Headboard Mount
(G) Headboard Mount
Mounting Block
Failure to follow these warnings and assembly instructions could result in
serious injury or death. Read all instructions before assembling the
headboard. Keep the assembly instructions for future use. Before each usage
or assembly, inspect the headboard for damaged hardware, or missing parts.
DO NOT use the headboard if any parts are missing or broken. If replacement
parts and instructional literature are needed contact the manufacturer. DO
NOT substitute parts.