DRESSER ASSEMBLY INSTRUCTIONS PAGE 1 OF 3
ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1.Remove hardware from box and sort by size. 2.Please check to see that all hardware and parts are present prior to start of assembly. 3.Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. Warning! 1.Don't attempt to repair or modify parts that are broken of defective. Please contact the store immediately. 2.This product is for home use only and not intended for commercial establishment.
ANTI - TIPPING KIT HARDWARE IDENTIFICATION PARTS IDENTIFICATION 1 SET A. DRESSER 1. SHORT SCREW 1PC 2. LONG SCREW 1PC 3. CABLE TIE 1PC 4. 'L' BRACKET 2PCS This tip restraint must be attached to a wall stud STEP 2 Locate the other bracket on the wall over a wall stud and using long screw enclosed. STEP 1 Attach a bracket securely to the back top rail of the dresser using short screw provided, through the smaller hole. two inches below the mounting bracket secured to the back of dresser.
