User's Manual

DLT 300 3.0 Digital Transceiver and DLR 360 3.0 Digital Receiver
17
2-Way Setup for Tour Guide Operation (continued)
1
A533
32 4
5 6 87
2-way Tour Guide Setup
9 10 11 12
13 14 15 16
17 18 19
Press and hold POWER
button for 2 seconds
to turn DLT ON
Press and Hold and
for 3 seconds to enter
programming mode.
The other icons will disappear
and the current mode icon
will be blinking on the screen.
Use the buttons
to change to 2-way Tour
Guide mode.
Press the button to
select this mode and move
to the next setting.
The ADDRESS icon will be
blinking. Use the
buttons then the button
to choose address (0-1023).
Use the buttons
to select Master 1 (first unit
only). There must be only
one Master 1 per group.
Press the button to
select this mode and move
to the next setting.
The TIME icon will be blinking
with the hour. Use
then the button to
choose hour (am or pm).
The GROUP icon will be
blinking. Use the
buttons then the button
to choose group.
The TALK icon will be
blinking. Use the
buttons then the button
to choose the Mic Level.
The Sidetone Level will be
blinking. Use the
buttons then the button
to choose the Sidetone Level.
The TIME icon will be blinking
along with the minutes. Use
the buttons to
adjust the minutes.
Press the button to
save the time and move
to the next setting.
The first secure code digit
will be blinking. Use
to adjust the first digit.
Push to advance to the
next digit.
Repeat steps 15 and 16
until all of the digits are
adjusted. Push .
The currently selected mode
will be blinking. This is the
beginning of programming.
Press and Hold and
for 3 seconds to exit
programming mode.