Specifications

© 2004 Nology Engineering, Inc
34
Sequential Shift Light
The Nology Sequential Shift Light (SSL) is a highly accurate, microprocessor controlled shift light, which can be
easily adjusted using the increase and decrease buttons.
The SSL can be used with most 2, 4, 6, or 8 cylinder
engines, including Direct Ignition and Waste Spark
systems that use points, electronic ignition, or have
an ECU Tach output. It can also be used with most
capacitive discharge ignitions (CDI) with a Tach
output.
The Sequential Shift Light has a small
(40x16x13mm) remote LED module incorporating 4
LEDs that light up sequentially as the engine
approaches redline. The shift point being indicated
by the 4th (red) LED.
Mount the SSL on the dash or on the A-pillar, or
anywhere you like. Never over-rev your engine
again and miss a shift.
Technical Specifications:
Microprocessor: 4 MHz RISC based
Dimensions: 82x40x22mm
Weight (approx.): <120g
RPM Range:
2 Cyl: 1,000 to 20,000 RPM
4Cyl: 1,000 to 20,000 RPM
6 Cyl: 1,000 to 12,000 RPM
8 Cyl: 1,000 to 10,000 RPM
Temperature Range: -25 to +85 (degrees Celsius)
Operating Voltage: 9 - 16V
Accuracy: +/- 10RPM @ 6kRPM
LED Brightness: 350mcd each
Never Over-rev Your Engine Again
Shift Light Part # 460 001 011
Nology Model: Ariel Rose Photographer: Rick Anthony