Specifications

760-591-0888 WWW.NOLOGY.COM
35
Put A Dyno In The Palm Of Your Hand
PDA-Dyno

& OBD II Scan Tool
Just sync the PDA-Dyno software onto your PDA, connect the interface
cable to your OBD II connector under the dash, and you have a dyno in the
palm of your hand.
Measure:
• Horsepower and Torque
• 0 to 60 times (and other speed combinations)
• 1/4 mile time and speed
• Fuel Economy (MPG)
Never again pay for dyno-time
and make every road your personal drag-strip.
Check and clear Diagnostic Trouble Codes, turn off the pesky Check Engine Light and view/record all
OBD II supplied sensor data in real time.
Lets say you want to upgrade your engine and you would like to know if that new trick air cleaner really
gives you more power. Do a baseline run and record the horsepower and torque, together with airflow data.
Now install the new air cleaner and make another run (damn this is hard work). Now compare the data.
More horsepower from more airflow - the air cleaner worked. Do the same test in a 0 to 60, or ¼ mile run.
Faster time and speed - the air cleaner worked. Get it?
Use the OBD II Scan Tool function to clear Diagnostic Trouble Codes (DTC) and to turn off the Check
Engine light. Yes the one that came on right after you did all those cool engine mods. Perfect for when you
have to get the car smogged.
Displays all generic OBD II data and supports protocols:
SAE J1850 (VPW,PWM); ISO 91412 (ISO); ISO 14230 (KWP 2000, EOBD II).
The PDA-Dyno also turns your PDA into a Data
Acquisition System. Record all data during a road
race, or record your gas mileage (mpg) for a specific
trip (if supported). A standard 8 MB PDA
can hold hours of driving data (depending on free
memory space).
Additional Features
Worldwide Patents Pending