Specifications
760-591-0888 WWW.NOLOGY.COM
39
The Nology G-Dyno Plus is a powerful 11 Channel data acquisition system and performance computer,
utilizing a high-precision two-axis accelerometer to measure acceleration, braking and cornering. In addition,
record 11 other signals for later evaluation. For instance, record the throttle position or brake pedal pressure to
see when youre on the gas or when and how hard you brake.
Think about all the data you would like to have to find a quicker way around the racetrack, or make your
car go faster. The Nology G-Dyno
Plus can do it all, for a fraction other data
acquisition systems cost.
Use it to measures the entire performance of a vehicle. Measure horsepower and
torque, 0 to 60 time, ¼ mile time and speed, cornering forces, handling and braking
efficiency and so much more. Use the G-Dyno Plus to tune your engine, setup
the suspension for best handling, check braking performance and check tire grip.
Use the powerful PC analyzing software to process and graphically display the data.
Measure:
• X/Y acceleration 100 samples per second.
• 0-60 mph / 0-100 kmph timing.
• 30-50, 50-70 or any other speed combo.
• Standing 1/8 or ¼ mile times and speeds.
• 60 mph - 0 or any other braking times and distance.
• Horsepower and Torque - real road horsepower.
• Before / after tests show if those modifications
really are making any difference!
• Peak and average cornering G’s
• Measure tire effectiveness
• Record data from 11 other sensors
Data logging with the G-Dyno™ Plus:
• 7 channels of 8 bit analog data, for example: air/fuel ratio, throttle position,
brake pedal pressure, temp sensors, oil pressure, knock sensor etc.
All recorded at 12.5 samples per second. Easily set for different signal levels.
Factory preset inputs: 1 channel - 12V range, 3 channels - 5 V range
and 3 channels - 2.5V range.
• 4 channels of digital data, for example:
injector pulses, speed sensors, gear sensors, lap counter etc.
Recorded at 100 samples per second.
• Tach input – can use inductive ignition clamp.
• Optional wireless input: Replace 2 analog inputs with data from separate RF
transmitter with a 30 ft range.
• All wiring by screw terminal block, for ease of installation and removal.
• On / off by push button with audible confirm.
• 24 hour life from 2 AA cells (data logging, without GPS). 2 hours with GPS.
• Comes complete with software (Win 95/98/2000/XP), serial data cable and 16MB MMC.
The high-precision two-axis accelerometer is accurate to 0.005 g
with a resolution to 0.01g. The small battery powered G-Dyno
Plus data logger stores data on a standard MMC card, allowing
up to 3 hours of recording on the included 16MB card. (128MB
cards 12 hour storage).
PC Software:
• PC software to download logged data,
create text and spreadsheet (Excel) files.
Accessories:
• MMC/CF/SD/SM USB interface card reader.
• MMC memory 16, 64, or 128MB.
• Inductive RPM clamp.
• 12 Volt DC Power Supply
• GPS receive (See following section)
The Nology G-Dyno
™
Plus
-
Automotive Performance Computer &
Data Acquisition System with Accelerometer