Specifications

The Nology G-Dyno
™
Plus GPS
-
-
Add a high-performance GPS receiver to the already powerful G-Dyno Plus data acquisition system and end up
with a unique combination of INS (Inertial Navigational Systems),
high-performance GPS and a powerful data logging system, all with a 3D
flexible graphics display function.
This is one of the most powerful combinations found in a data acquisition
system for motor racing.
The G-Dyno Plus with GPS measures the entire performance of a
vehicle continuously from the INS and GPS data, and automatically maps the
racetrack as you drive! It records the speed, distance, horsepower, torque,
cornering Gs, braking Gs and more, against time and track position. It can
do measurements of power and torque in one gear, or power and speed / time through the gears. Braking time / distance
can also be measured easily. Cornering and handling forces can be measured at the same time.
The data is displayed as a 3D-plot, road / track position against time, or full 3D position with altitude! You can drive the
track with the animated data display, zoom in on areas to fine-tune your car and driving. All parameters of the graph can be
altered and saved with our powerful chart editing tools. The supplied PC software generates text and .csv files (Excel), so
you can easily read and use the data in other applications.
The high-performance custom SirfStar 2 GPS receiver can be used separately with almost any SatNav software.
Discover what power your car really puts to the road and find a quicker way around the track. The
Nology G-Dyno Plus with GPS is guarantied to take seconds off your laptime.
Automatically map the racecourse, display speed, horsepower and all logged data from one of the 11 channels against track
position and time. Tune your vehicle and driving for any racetrack.
Features:
• All features are the same as the Nology G-Dyno™ Plus
except for the addition of GPS data.
• Full GPS data.(RMC,GSA,GGA,VTG,GSV,GLL messages)
• 24 hour life from 2 AA cells (data logging, without GPS).
2 hours with GPS.
GPS Receiver:
• 12 Channels “All-In-View” Tracking
• Cold/Warm/Hot Start Time: 45/38/8 seconds
• Reacquisition Time: 0.1 seconds
• Accurate 1PPS Output Signal Aligned with GPS Timing
• Trickle Power Enabled for Power Saving
• Multi-path Mitigation Hardware
• Superior Sensitivity for Urban Canyon Environment
• On-board RTCM SC-104 DGPS and WASS Demodulator
• SiRFstarII Architecture
• Red / green fix available indicator LED.
• Field Software Upgrade Supported
• Fully water-proof
• Rubberized magnetic base for mounting on car
• Visual GPS software for PC and Winfast pocket
PC software included.
GPS Clamp
GPS Receiver
DC Converter
40
© 2004 Nology Engineering, Inc
• 450 001 021 G-Dyno Plus
• 451 001 011 GPS Receiver
• 451 001 021 Inductive Clamp
• 451 001 03112 Volt DC Power Supply