PLR BP1 Proloop Body Pack Induction Loop Receiver Instructions For Use and Care
Operating Instructions 1. Open the battery compartment. Slide the battery selection switch to the correct position for the type of batteries that will be used. Use “Alkaline” for nonrechargeable batteries, “NiMH” for rechargeable NiMH batteries (only). (FIG. A) FIG. A: Battery Compartment Tone Control TONE CONTROL – AA + + AA – ALKALINE/ NiMH SWITCH A298 2. Install the AA batteries. Be sure to observe proper polarity (+/-).
4. Turn the receiver on, and adjust the volume (top control) and tone (inside battery compartment) to a comfortable listening level. (FIG. B). FIG. B: Top of Receiver ON/OFF, VOLUME CONTROL SWITCH HEADPHONE JACK OFF "ON"/ LOW BATTERY/ FLASH CODE INDICATOR A299 Belt Clip Installation To install the belt clip on the rear of the PLR BP1, position the belt clip on the back. Turn the belt clip 180˚ left or right to secure the clip. The BP1 can now be clipped onto a belt.
FIG. C: Belt Clip Installation Hints and Tips The PLR BP1 has been designed to be as easy to use as possible. However, if you have trouble, check the following: A132 are securely • Make sure the earphone/headphones plugged in. • Make sure the batteries are not depleted and have been correctly inserted into the battery compartment. • Turn down the volume if above 3 or 3 ½. • Turn the tone control (in the battery compartment) counterclockwise to reduce high frequency boost.
System Specifications PLR BP1 Receiver Dimensions: 4.1”H x 2.85”W x 1.38”D (104 mm H x 72 mm W x 35 mm D). Weight: 4.6 oz (130 g) with batteries, 2.6 oz (73 g) without batteries. Color/Material: Black ABS/polycarbonate molded plastic case. Battery Type: (2) AA (1.5VDC) Alkaline or NiMH (rechargeable). Battery Life: Up to 200 hours with Alkaline batteries. LED Indicator: Green LED indicates power on, flashes when batteries are low. Headphone Jack: 3.
System Specifications PLR BP1 Receiver Loop Sensitivity: Compatible with IEC 60118-4 Systems S/N Ratio: 62 dB Typical Notch Filter: -20dB @ 120Hz fixed notch filter Tone Control Range: -10dB cut @ 300 Hz to 6dB boost @ 6 kHz Environment: Operational: 32°F to 122°F (0°C to 50°C) at less than 95% RH Storage: -13°F to 131°F (-25°C to 55°C) at less than 95% RH Warranty: 5 Years Approvals: CE, FCC, Industry Canada, RoHS2, WEEE
Battery Information The PLR BP1 uses 2 AA batteries. We commend using Williams Sound Alkaline batteries (BAT 001-2) or rechargeable batteries (BAT 026-2) for longer battery life than other brand batteries. Low Battery Indicator The “On” indicator on top of the unit will flash to indicate low battery. Multi Charger CHG 3512 This optional charger is ideal for customers using rechargeable batteries. It will charge up to 12 receivers at one time. See our website or call us for ordering information.
Safety Information HEARING SAFETY CAUTION! This product is designed to amplify sounds to a high volume. To protect your hearing and the hearing of others: 1. Make sure the unit is OFF or the volume is turned down before putting on the earphones. 2. Set volume level at the minimum setting you need to hear. 3. Do not allow children or other unauthorized persons to have access to this product.
Warranty Williams Sound products are engineered, designed, and manufactured under carefully controlled conditions to provide you with many years of reliable service. Williams Sound warrants the PLR BP1 against defects in materials and workmanship under normal use and conditions for 5 years from date of purchase. Microphones, earphones, headphones, batteries, chargers, cables, carry cases, and most other accessory products carry a 90-day warranty.
Customer Service If you experience difficulty with your system, call Toll-Free for Customer Assistance: 1-800-843-3544 (U.S.A.) or +1 952 943 2252 (Outside the U.S.A.) If it is necessary to return the system for service, your Customer Service Representative will give you a Return Authorization Number (RA) and shipping instructions. Note: FCC regulations, section 15.21, requires the user to comply with the rules of transmitter operation.
