Operating instructions

Operating Instructions

1. Open the battery compartment. Slide the battery

selection switch to the correct position for the type of

batteries that will be used. Use “Alkaline” for non-

rechargeable batteries, “NiMH” for rechargeable NiMH

batteries (only). (FIG. A)

2. Install the AA batteries. Be sure to observe proper

polarity (+/-). Damage due to improper battery

installation may void the warranty on the product. The

“Power On” LED on top of the unit will ash when the

batteries are getting low; you may continue to use until

the unit quits operating, then replace or recharge the

batteries. (FIG. A)

3. Insert the earphone or headphone plug into the

headphone jack. (FIG. B)

TONE

CONTROL

–

Tone

Control

A298

ALKALINE/

NiMH SWITCH

FIG. A: Battery Compartment