Model PPA R1600 FM Remote Speaker Manual and User Guide MAN 135G
PPA R1600 FM Remote Speaker FM Remote Speaker Model PPA R1600 Contents System Overview...................................................................................................................................................................... 2 Cautions and Safety Instructions.............................................................................................................................................. 3 Installation...................................................................
PPA R1600 FM Remote Speaker Cautions and Safety Instructions CAUTION! CAUTION RISK OF ELECTRICAL SHOCK — DO NOT OPEN ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR SIDES). NO USER-SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. AVIS RIQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR ! ATTENTION: POUR RÉDUIRE LE RISQUE DE DÉCHARGE ÉLECTRIQUE, NE RETIREZ PAS LE COUVERCLE (OU CÔTÉS). IL NE SE TROUVE AL’INTÉRIEUR AUCUNE PIECE POUVANT ETRE RÉPARÉE PAR L’USAGER.
PPA R1600 FM Remote Speaker USE 1. Accessories - To avoid personal injury: • Do not place this speaker on an unstable cart, stand, tripod, bracket, or table. It may fall, causing serious injury and serious damage to the speaker. • Use only with a cart, stand, tripod, bracket or table recommended for this purpose or included by the manufacturer. When using the included bracket, follow the manufacturer's instructions for mounting the speaker. 2.
PPA R1600 FM Remote Speaker R1600 Features and Controls PPA R1600 Remote Speaker features 1. MASTER VOLUME CONTROL - controls the overall volume of the R1600 as well as the LINE OUT (11) connector. 2. TONE - this is a variable frequency high-cut tone control that is primarily used to reduce high frequency feedback. The control is essentially flat when turned fully clockwise and reduces more high frequencies as it is rotated counterclockwise. 3. LED - displays the power state of the speaker.
PPA R1600 FM Remote Speaker Figure.
PPA R1600 FM Remote Speaker Using the R1600 Remote Speaker Select a Location The R1600 can be placed on a table top, shelf or other flat surface in the listening area; or it can be threaded on to a microphone stand or mounted on a wall or ceiling (see mounting options, page 9). A power outlet should be accessible and enough space should be available to run wiring from the audio source to the speaker.
PPA R1600 FM Remote Speaker Select a Frequency: The R1600 has 16 pre-tuned channels available in the 72–76 MHz bandwidth. Most R1600’s ship from the factory set to switch position 1, or 72.1 MHz (channel A). To change the frequency on the R1600, refer to the frequency selection chart on the right (Figure 3), then adjust the CHANNEL SELECTOR (Figure 2) to the corresponding switch setting.
PPA R1600 FM Remote Speaker Mounting Options for the R1600 FM Remote Speaker Wall Mounting The R1600 is supplied with a wall mounting bracket. It can be attached to the speaker via the built-in 1/4" x 20 threaded holes on the top and bottom of the speaker using the included large screws. Supplied rubber pads can be applied to the inside surface of the bracket to protect the speaker surface from scratching and reduce the possibility of the speaker rotating in the bracket.
PPA R1600 FM Remote Speaker PPA R1600 Specifications Dimensions: Color: Weight: Rated Power: Frequency Response: Max SPL @ rated output: 12.4”H x 7.1”W x 7.5”D (315mm x 180mm x 190mm) Black with white legends 9.4lb (4.3kg) approx. with SLD 072 receiver 20 watts continuous 65Hz – 7kHz 101dB @ 1 meter Woofer: 5.25” (133.
PPA R1600 FM Remote Speaker Limited Warranty Williams Sound products are engineered, designed, and manufactured under carefully controlled conditions to provide you with many years of reliable service. Williams Sound warrants the PPA R1600 against defects in materials and workmanship for TWO (2) years. During the first two years from the purchase date, we will promptly repair or replace the PPA R1600.
PPA R1600 FM Remote Speaker 10300 Valley View Rd • Eden Prairie, MN 55344 800-328-6190 / 952-943-2252 • FAX: 952-943-2174 www.williamssound.
