User manual

29
Personal PA
®
DSP FM Wideband Transmitter
6. Connect to the Router through Wi-Fi on the Wireless Device.
a. Make sure the Wi-Fi is turned ON.
b. In Wi-Fi settings, look for the router SSID you got from step 1.
c. Click on the Router SSID to connect to it.
d. Enter the Router Wi-Fi password you got from step 1.
e. The wireless device should now indicate that you are “connected” to the router.
f. Exit all the way out of the settings back to the home screen on the wireless device.
7. Connect to the T45 with the Wireless Device.
a. Open the web browser on the wireless device (i.e. on the iPad: Safari)
b. In the address bar of the browser, type in the IP address of the T45 (static from step 2 or dynamic from step 5) and hit
“Enter”.
c. When you connect to the T45, you should see the Login Page (see Figure 17).
8. After logging in, verify control of the T45 by changing a setting using the wireless device, and watching it change
on the T45 display.
a. An easy setting to verify is changing the channel (see Figure 20).
9. For easy access next time, build a “favorite” link to the T45 (just like you would for a favorite website).
a. If you can’t make a link, you can always go back to the IP address (step 7) by going into the website history or typing
in the rst few numbers of the address (i.e. “192.168”) into the address bar and it should see the link you recently
visited. This method is cumbersome, which is why a “favorite” link is suggested.
Note: The procedure outlined here is a simple example of the basic steps required to set up control of the T45 transmitter
with a wireless device. Existing network topology, security, type of devices and network preferences all contribute to how the
network may be set up and how you may be able access the T45. Consult with a trained IT professional if you are unsure
how you should set up network control.