Installation guide

Williams Sound
®
Helping People Hear
3
SYSTEM OVERVIEW
Thank you for purchasing the PERSONAL PA
®
FM Monitor Receiver from Williams Sound
Corp. This monitor receiver is intended to be used for hearing assistance with a Williams
Sound PERSONAL PA Transmitter operating on one of 10 wideband channels from 72 - 76
MHz. The Monitor Receiver provides a convenient way to receive the PPA Transmitter
broadcast in a remote location. Depending the antennas being used, the receiver will operate
up to 500 feet from the transmitter
To avoid difficulties, please read through these instructions as you begin to use the system.
Then save them for questions that arise as you continue to use your Williams Sound Monitor
Receiver.
If you have problems with the system, don’t hesitate to call us toll-free at 1-800-843-3544.
SYSTEM COMPONENTS (R801)
• FM Receiver (R801)
• Power Supply (TFP 016)
• “Rubber Duck” Antenna (ANT 021)
• 1m RCA to RCA Audio Cable with RCA to 1/4” Adapter (WCA 013/CNA 007)
• Instruction Manual (MAN 098)
F
IG. 1: OVERALL SYSTEM DIAGRAM
Phones
PPA T4 Professional FM Auditory Assistance Transmitter
Power -12dB -6dB 0dB +6dB
Audio Level
Lo
Increase
Decrease
Too Hi
Audio Adjust
RF Carrier
Ok
Ok
Frequency Synthesized, Channel-Selectable
SpeakersAmplifier
PPA Transmitter
R801 Receiver
Phones
R801 Professional FM Auditory Assistance Receiver
Williams Sound
Power
Carrier
Frequency
Squelch
Frequency Synthesized, Channel-Selectable
75.7
75.9
72.1
72.3
72.5 72.7
72.9
74.7
75.3
75.5
HOW IT WORKS:
The PPA Transmitter produces the FM radio signal. The R801 picks up the transmitterd
signal and feeds it into a sound system.