User's Manual

®
17
USING THE OPTIONAL CHG 3512 BATTERY CHARGER TO CHARGE
THE PPA R35 RECEIVER
Before inserting the PPA R35 receivers into the charger, be sure that each receiver has NiMH batteries
installed. Also, check to make sure the switch setting in the PPA R35 battery compartment indicates the
“NiMH” setting.
Step 1: Plug the TFP 035 power supply into the AC wall outlet. Plug the power connector into
the rear of the CHG 3512 unit (See Figure 13a).
Step 2: Insert the PPA R35 receivers into the charging slots. The receivers must be placed in the
charger facing forward to make contact with charger contacts (See Figure 13b). A red
LED indicator will illuminate when charging has started.
Important: Please refer to the CHG 3512 (MAN 116) instruction sheet for c
harging time and
detailed setup instructions.
WARNING: DO
NOT ATTEMPT TO RECHARGE DISPOSABLE BATTERIES!
WAR
NING: DO NOT ATTEMPT
TO RECHARGE D
ISPOSABLE BA
TTERIES!
Williams SoundWillia
ms So
und
CHG
CHG
CHG
CHG
CHG
CHG
PPA R35 Receiver
Charging LED
Indicator
CHG 3512
Front-Top View
CHG 3512
Rear View
TFP 035
AC Power Connection
FIGURE 13A:
FIGURE 13B: