Caution : You must read this before you proceed Shelf WARNING!! Furniture Tipping Rish. Serious risk of severe or fatal crush injuries can occur from furniture tipping over if not secured. Children like to climb on furniture and Unsecured furniture can pose a serious danger.
Please follow all instructions and install the tip-over restraints provided. In addition to installing the restraints, to help prevent tip-over: 1. Unless specifically desgned to accommodate, do not set TV's or other heavy objects on top of this product. 2. Never allow children to climb or hang on top glass. 3. Do not step on the Shelf.
⑦ Bracket Screw 2 ⑧ Restraint Strap 2 ⑨ Hammer (not provided) 1 ⑩ Power Drill (not provided) 1 Before Beginnin g Assembl y: X21 X9 X2 X2 X2 X2 X2 X1 Page 3 Of 9
Upper Side Frame(B) Shelf(A) Back Connecting Frame(D) Base Side Frame(C) Front Facing This Shelf has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Shelf parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly.
Put the upper side frame (B) into the base side frame (C) and fix with bolt (②) and Arc-shaped Washer (③) using Allen Key(④). TIGHTEN HARDWARE COMPLTELY. Step 2 Fix two completed side frame to Back Connecting Frame (D) using Bolt (②) with Allen Key(⑦). DO NOT TIGHTEN HARDWARE COMPLETELY.
Fix Shelf(A) on the finshed metal frame using Arc-shaped Washer (③) and Bolt (①) with Allen Key(④). TIGHTEN ALL HARDWARE COMPLTELY. Usage For Shelf Restraint Device: To secure Shelf against wall, attach 2pcs Metal Brackets(⑥) on wall, use Restraint Strap(⑧) to connect the Shelf Instructions: Step 4 Drill two holes on wall at same height as Top shelf with Power Drill(⑩). You can mark these points in two ways as below: 1) Move the Shelf back to the wall. Mark two points same height as Shelf on the wall.
Step 5 Attach Plastic Anchor (⑤) to holes on wall with Hammer(⑨ ). Step 6 Attach Metal Brackets(⑥) to Plastic Anchor(⑤) using Bracket Screw(⑦) with Allen Key(④) .
Move the Shelf back against wall. Pull the Restraint Strap(⑧) through the Metal Brackets(⑥ ) on the wall and connect metal pole of shelf one by one, and pull the Restraint Straps(⑥ ) tight. Step 8 In a sequential manner, drive in and fully tighten all Bolts at all joints. Your Shelf is now ready to for use.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
