Assembly Instructions

Fix Shelf(A) on the finshed metal frame using Arc-shaped Washer (③) and Bolt (①)
with Allen Key(④). TIGHTEN ALL HARDWARE COMPLTELY.
Usage For Shelf Restraint Device:
To secure Shelf against wall, attach 2pcs Metal Brackets(⑥) on wall, use Restraint
Strap(⑧) to connect the Shelf
Instructions:
Step 4
Drill two holes on wall at same height as Top shelf with Power Drill(⑩).
You can mark these points in two ways as below:
1) Move the Shelf back to the wall. Mark two points same height as Shelf on the
wall.
Note: The Metal Brackets need to be secured to solid, load bearing surface. Please
use a Stud Finder(not supplied) if needed to locate the Wall Frame.
2) Measure the height of the top shelf with ruler/measuring tape and mark on wall to
keep them accurate and same height.
Page 6 Of 9