Installation & Assembly

 Page:  ‐4‐/4
7.Gently push the fixture to wall, and carefully rotate the fixture
to make the holes on back plate and mounting plate (B)are to be
aligned ,then thread the screws （E）to secure the fixture in place
8.
Checkeverythinginstalledproperly,thenyoucouldturnonthelight. 

CLEANING 
To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as
scouring pads or powders, steel wool or abrasive paper.
ORDERINGPARTS 
Keep this sheet for future reference, and in case you need to order replacement parts. All parts for this fixture
can be ordered from place of purchase. Be sure to use exact wording from illustration when ordering parts.