Installation & Assembly

ManualsBrandsWilliston Forge ManualsCeiling LightsDiaundra 1 - Light 6.36'' Caged Geometric Semi Flush Mount

T CEILING MOUNT

ASSEMBLY/INSTALLATION INSTRUCTIONS

WARNING: Risk of Fire. Min 75ºC supply conductors. Consult a qualied electrician to ensure correct

installation.

Turn off the main power at the circuit breaker before installing the xture, in order to prevent possible

shock.

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualied electrician.

Remove the xture and the mounting package from the box and make sure that no parts are missing by

referencing the illustrations on the installation instructions.

Phillips screwdriver.

CAUTION

GENERAL

TOOLS REQUIRED

ASSEMBLY AND INSTALLATION

(CONT.)

Please read carefully and save these instructions, as you may need them at a later date.

Turn off the power at fuse or circuit breaker.

Turn on the power at fuse or circuit breaker.

JUNCTION BOX

MOUNTING SCREWS

WIRE NUTS

CROSS BAR

GROUND SCREW

FIXTURE SCREWS

FIXTURE

SCREW HOLES

BALL NUTS

IRON RACK

SOCKET RING

BULB (not included)

IRON RACK (01)

DECORATIVE NUTS

1. Gently take all parts out of the package, lay them on a smooth surface, unscrew the BALL NUTS

and the FIXTURE SCREWS. Attach the CROSS BAR to the JUNCTION BOX using (2) MOUNTING

SCREWS.

2. Make wire connections with WIRE NUTS:

A - Connect the black wire from Fixture to the black supply wire.

B - Connect the white wire from Fixture to the white supply wire.

C - Attach the xture ground wire to the CROSS BAR with the green GROUND SCREW. Then

connect it to the supply ground wire with a WIRE NUT. Carefully tuck wires back into the JUNCTION

BOX.

3. Attach the FIXTURE to the CROSS BAR through SCREW HOLES as shown, and secure it with

BALL NUTS.

4. Attach the IRON RACK to the FIXTURE and secure it with SOCKET RING.

5. Install BULBS (not included). See relamping label at socket area or packaging for maximum allowed

wattage.

6. Attach the IRON RACK (01) to the IRON RACK as shown, and secure it with DECORATIVE NUTS .

(1LT SEMI FLUSH CM GAL)

(1LT CEILING MOUNT BRZ)