Assembly Instructions














Page 4 of 4
Align the table legs (#2) to the pre-drilled holes on the corners of the table top
(#1). Insert 3 bolts (#A) into each leg and secure using the Allen wrench (#B).
Align the leg support (#3) to the pre-drilled holes along the sides of the legs (#2).
Insert a bolt (#A) into each and secure using the Allen wrench (#B).
ASSEMBLY IS COMPLETED
Carefully turn the completed
table upright. Make sure the
table is rested on a flat
surface and does not feel
loose or wobbly. If it does,
double check that the bolts
are secured and properly
tightened.