(F) x 1 Allen Key (G) x 16 M6x55mm Screw (H) x 8 Foot Pad (I) x 16 M6x15mm Screw (J) x 4 Adjustable Plug (K) x 4 Plug Nut
A Metal side 4 B Side rail 8 C Top 1 D Adjustable pole 4 E Shelf 2 F Allen Key 1 G M6x55mm Screw 16 H Foot Pad 8 I M6x15mm Screw 16 J Adjustable Plug 4 K Plug Nut 4 C B B A B B A D D D D B A E E B B B A
step 1. X2 B B A B F B (H) (F) Allen Key (G) x 16 M6x55mm Screw A (H) x 8 Foot Pad G H 1. Tear off the foot pad and stick on the bottom of the metal legs (A) as shown. 2. Attach the side rail (B) to the metal side (A) as shown. Make sure the screw hole on the side should be placed in the inner side for assembly.
step 2. D D D F D C I (F) Allen Key (I) x 16 M6x15mm Screw 1. Attached the adjustable pole (D) to the top (C). 2. Using the Allen key to tighten the screws.
step 3. A A A A C K (J) x 4 Adjustable Plug (K) x 4 Plug Nut J 1. Attached the part (C) to Part (A). If it is hard to put the metal pole to the hole in the part (A), you could loose the screw (G), then it is easy to put the two parts together. Then tighten the screw (G). 2. If you want to adjust the height, you could put the adjustable pole up & down, and use the adjustable plug (J) and plug nut to tighten.
step 4. E E 1. Put the shelf (E) to the metal rail (B) as shown.