QUEEN/FULL ASSEMBLY INSTRUCTION
IMPORTANT – READ CAREFULLY – RETAIN FOR FUTURE REFERENCE WARNING Children must stay away from the assembly zone, preventing children from potential asphyxia because of plastic bag and foam breathing in nose; WARNING For your safety, please do not tread or climb product. WARNING The loading weight of seating shall be within the range that vendor claims. WARNING The product is designed for adults use, domestic use and indoor use only.
Parts List Tips: Check all the components & hardware assembly before assembly. Do not install in case part is missing. Provide your order ID and pictures will be helpful and fastest to send you replacement part for free.
Assembly Steps 8 8 I 8 J 4 8 F 8 8 G 8 4# 1 8 H 20 5# 1 1 Please use screw A to lock Headboard Frame 2 with accessorie G on Headboard Bar as below. Tips: Please do not completely tighten up screws! Will be tighten up completely in the end.
2 3 Please use screw A to lock Footboard Frame 2 with accessorie G on Footboard Bar 3 as below. Tips: Please do not completely tighten up screws! Will be tighten up completely in the end. 33 2 G 10 10 A 3 G to lock bedside frame / on Headboard as below. 11 C B A A & 1 G G Please use screw Tips1: Please make sure the bedside frame's notches are all algned inward as picture in below. Tips2: Please do not completely tighten up screws! Will be tighten up completely in the end.
4 5（1）Please plug in bedside frame 5 & 10 / 11 & 12 as below （2）Supportor 6 attached with bedside frames and make sure each side holes are matched completely; (3) use screw D & E lock bedside frame as below Tips:Please do not completely tighten up screws ! Will be tighten up completely in the end. Please use screw B & C to lock bedside frame 5 / 12 on Footboard as below. Tips1: Please make sure the bedside frame's notches are all algned inward as picture in below.
6 7 (1) Please wearing cup H on main slat 8 with two sides; and make sure holes in the midlle all upward as below; (2) Plug in main slat 8 on bedside frame as below; Please make sure plug in are completely. 8 F 7 8 4 8 Please use screw F to lock support frame 7 completely as below.
9 (1) Please wearing cup H on slat 9 with two sides ; (2) Plug in main slat 9 on bedside frame as below; Please make sure plug in are completely. Tips: please make sure all slats are completely plugged in. (1) Please use screw I to lock main slats on bedside frame as below completely. (2) Please use part J to lock on headboard & footboard as below. (3) Please completely tigh up all screws on the bed.
