Installation & Assembly

Bistro Bar Swivel Chair

Assembly Manual

ASSEMBLY INSTRUCTIONS

Prior to assembly, make sure you lay out and identify all the parts listed

below in the parts list.

Tighten all nuts and bolts securely. All bolts should be hand tightened

before use. Never use power tools or excessive force during assembly

and tightening of bolts.

Should you experience any difficulty during assembly or if any part is

missing or damaged:

Contact our customer service.

PAGE 1
Bistro Bar Swivel Chair Assembly Manual ASSEMBLY INSTRUCTIONS Prior to assembly, make sure you lay out and identify all the parts listed below in the parts list. Tighten all nuts and bolts securely. All bolts should be hand tightened before use. Never use power tools or excessive force during assembly and tightening of bolts. Should you experience any difficulty during assembly or if any part is missing or damaged: Contact our customer service.
PAGE 2
Part list Part A Description Qty 1 Right Arm 16 J 4 Bolt 1 K 1 L Seat D Qty I Left Arm C Description Bolt 1 B Part Washer 36 12 Nut Back 4 E M 20 Cap Leg 1 F N Wheel 1 G P Leg Connector H 1 Allen Key 4 Bolt 8 Nut Q 1 Screw Driver
PAGE 3
1. Swivel Chair Connect Right Arm &Left Arm (Part A&Part B) to Seat (Part C) using Bolt(I) , Washer (K) and Cap (M). As shown in diagram. K I M 2. A Connect Back (Part D) to Right arm (Part A) and Left arm (Part B) using Bolt(I) ,Washer (K) and Cap (M). as shown in diagram.
PAGE 4
Loveseat 3. Attach Leg (Part E) to Wheel (Part F) using Bolt (I),Washer (K), Nut (L&N) and Cap(M) as shown in diagram. M I F 4. E G L E N Attach Leg(Part E) and Leg Connector (Part G) using Bolt(J) , Washer (K) and Cap(M) as shown in diagram.
PAGE 5
. Connect the finished ase (PartE&F&G) to the seat (Part C) using Bolt(H),Washer(K) and Nut(L).As shown in diagram. L K F E G 6. H Eventually,Make sure all bolt are fixed tightly before using on the level ground.