Installation & Assembly

 Page:  ‐3‐/4
4. Carefullypasswiresoverthemountingplate(A)
Securemountingplate(A)tooutletboxwith
  outletboxscrews（D）.






5.Makewireconnections
Connectwiresasbelowwiresconnectingshown.TAKENOTEOFYOURCOLOROFFIXTURE,NEVERCONNECT
WIRESTOGROUNDWIRES
ConnectgroundwireaccordingtobelowchartConnectwiresaccordingtobelowchart 










Twistplasticwireconnectoruntilwiresaretightlyjoinedtogether,wrapeachconnectorwithapprovedelectricaltapeand
carefullystuffallwiresintotheoutletbox

6.Raisecanopy(E)toceilingandsecurecanopy(E) 
  inplacebytighteningknobnuts(F)
ontoscrews. 



7. Install bulb (Not included. Please do not exceed the
maximum capacity recommended on the socket.)
