Caution : You must read this before you proceed Dining Chair Label Picture Description QTY A Chair Back 1 B Left Chair Leg 1 C Support Frame 1 D Seat 1 Page 1 Of 7
E Right Chair Leg 1 F Cross Bar 1 ① Description Bolt(M6x35mm) QTY 7 ② Washer(Dia18mm) 11 ③ Bolt(M6x15mm) 5 ④ Screw(14mm) 5 ⑤ Allen Key 1 ⑥ Power Drill (not provided) 1 Label Before Beginnin g Assembl y: Picture X7 X5 X5 X1 Page 2 Of 7
Parts Introduction Chair Back(A) Seat(D) Left Chair Leg(B) Right Chair Leg(E) Cross Bar(F) Support Cross Bar(C) Front Facing This Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly.
Step 2 2.1) Fix Support Frame (C) to left chair leg (B) and right chair leg (E) using Bolt (③) and washer (②) with Allen Key(⑤). 2.2) Fix cross bar(F) to left chair leg (B) and right chair leg (E) using Bolt (①) and washer (②) with Allen Key(⑤). DO NOT TIGHTEN HARDWARE COMPLETELY.
Place the Dining Chair on a LEVEL SURFACE to check for wobbles.If it wobbles, lift the Dining Chair some 30cm to 50cm high from theground.Keep your feet and toes well away from the drop zone.Drop the Dining Chair freely and vertically with the four legs, hittingthe ground, at the same time.This Drop Test will help to ensure that all the Bolts and gaps reachfull alignment status.Test again for evenness on a LEVEL SURFACE.If no wobbles are found, proceed to tighten all the Bolts.
Step 5 In a sequential manner, drive in and fully tighten all Bolts at all joints. Your Chair is now ready to for use.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
