Assembly Instructions

Place the Dining Chair on a LEVEL SURFACE to check for wobbles.If it wobbles, lift
the Dining Chair some 30cm to 50cm high from theground.Keep your feet and toes
well away from the drop zone.Drop the Dining Chair freely and vertically with the
four legs, hittingthe ground, at the same time.This Drop Test will help to ensure that
all the Bolts and gaps reachfull alignment status.Test again for evenness on a
LEVEL SURFACE.If no wobbles are found, proceed to tighten all the Bolts.When
tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then towards the next one.This could cause
the frame to warp.If there are still wobbles, loosen the Bolts and execute the
samedrop test.If the Dining Chair is not stable, it could lead to damaging theproduct.
Step 4
Make sure the chair frame is stable and tighten all screw fully. Then turn
the chair right side down. Fix the seat (D) to finished metal frame using
Screw (
④
) with Power Drill (not provided).
Page 5 Of 7