Instructions / Assembly

INSTALLATION INSTRUCTIONS

Undercounter Sink

Rectangle

MATERIALS

INCLUDED

COUNTERTOP*1

SINK*1

SPLASH*1/2

INSTALLATION

TOOLS

Tape Measure Pencil Screwdriver

Silicone Sealant

Epoxy

PRE-INSTALLATION

Step 1

Set countertop face down on clean,ast surface

Find and mark with pencil the center of the top

Find and mark with pencil the center of the sink

Step 2

Step 3

Step 4

Place sink on countertop and adjust to match mark

WILLOW BATH AND VANITY

Adjust wrench

PAGE 1
INSTALLATION INSTRUCTIONS Undercounter Sink Rectangle WILLOW BATH AND VANITY MATERIALS INCLUDED SPLASH*1/2 SINK*1 COUNTERTOP*1 INSTALLATION TOOLS Tape Measure Pencil Screwdriver Silicone Sealant Epoxy Adjust wrench PRE-INSTALLATION Step 1 Set countertop face down on clean,flast surface Step 3 Find and mark with pencil the center of the sink Step 2 Find and mark with pencil the center of the top Step 4 Place sink on countertop and adjust to match mark
PAGE 2
** Remove sink and clean both the surface of the countertop and edges of sink before starting installation INSTALLATION Step 2 Step 1 Apply epoxy to the rim of the Place sink on countertop and adjust to the center of sink using the applicator opening previously marked Step 3 Step 4 15 Minutes Allow the epoxy to dry for 10-15 For secondary support,attach the sink minutes before proceeding mounting hardware using the screwdriver Step 5 Step 6 24 Hours Apply silicone sealant to outside right Al