Owner's manual

ing location. The Mezzo has been optimized for use with its purpose-built stand. When
you mount the Mezzo Convergent Synergy in most other locations you will begin to see
more boundary interactions, which may alter the performance of the loudspeaker. Never-
theless, the Mezzo Convergent Synergy will certainly out-perform any other center-type
loudspeaker (with the exception of the Wilson Audio Polaris) regardless of its placement.
Placing the Mezzo Convergent Synergy in any location other than on the its purpose-
built stand will require the Mezzo to be rotated vertically such that precisely faces towards
the listening position. This will allow the Mezzo Convergent Synergy to take advantage of
the propagation delay correction technology (PDC). Simply placing the Mezzo Convergent
Synergy in a location without following the directions below will hinder its performance.
With the correct PDC you will find the vocals and dialogue more realistic and satisfying.
As with any component in your system that offers increased resolution and detail, a care-
ful setup is required.
There are four different setup procedures depending on your Mezzo Convergent Syn-
ergy location. The possible Mezzo Convergent Synergy configurations are as follows:
Section 4.4—Setup #1 Mezzo Convergent Synergy on Floor
Section 4.5—Setup #2 Mezzo Convergent Synergy on Stand
Section 4.6—Setup #3 Mezzo Convergent Synergy on Custom Stand or Shelf
Section 4.7—Setup #4 Mezzo Convergent Synergy on the Hourglass Stand
Please proceed to the indicated section for your particular installation for detailed
setup instructions.
Section 4.4—Setup #1 Mezzo Convergent Synergy on Floor
Note: Please read Section 5—Final Voicing before spiking the Mezzo.
The floor mounted Mezzo Convergent Synergy must be rotated up toward the listen-
ing position. This is done by using a taller spike in the front than in the back of the speaker
S e C T i O n 4 . 4 — S e T u p # 1 M e z z O C O n v e r g e n T S y n e r g y O n f l O O r
43
Wilson Audio Specialties
.