Owner's manual

Carefully lift the Mezzo Convergent Synergy and set the threaded setscrews into the

4 mounting holes located on the top of the mounted custom shelf.

3. Using the provided 3/8 – 16 nut, bolt the Mezzo Convergent Synergy to the

mounting bracket.

4. Turn to Section 4.7 for final assembly instructions.

Note: Be careful when loosening or tightening the screws that you do not damage the

painted finish.

Section 4.7—Connecting Speaker to Amplifier

Speaker Cables

The high current input terminals located on the rear of your Mezzo Convergent Syn-

ergy loudspeaker are color coded so that RED (marked “+”) corresponds to positive and

BLACK (marked “-”) to negative, common, or ground on the amplifier output. Be sure to

connect the loudspeakers in phase with each other. We recommend the use of the very

figure 13 – spade lug attachMent

S e C T i O n 4 . 7 — C O n n e C T i n g S p e a k e r T O a M p l i f i e r

Wilson Audio Specialties