Owner's manual

Section 8.1—Repair Procedures
Replacing an Open Resistor
The Mezzo Convergent Synergy has a resistor that will protect the tweeter, in most
cases, if the speaker is over driven during normal operation. This is done so that the driver
is not damaged. Replace a blown resistor as follows:
1. Determine which driver is not playing music.
2. Remove the appropriate resistor access cover from the enclosure by remov-
ing each of the 10-32 button head machine screws (see Figure 15 for resistor
cover location).
3. Using the appropriate Allen head, unscrew the 4-40 Allen bolt that holds the
resistor to its heatsink.
reSiStor acceSS
Main in binding poStS
figure 15 – Mezzo conVergent sYnergY cable connection and resistor access
WooFer reSiStor acceSS
S e C T i O n 8 . 1 — r e p a i r p r O C e d u r e S
77
Wilson Audio Specialties
.