Instruction Manual

ManualsBrandsWilson Audio ManualsAudioWATCH Center Series 3

Section 2.1—Uncrating the WATCH Center Channel

Initial Check

The WATCH Center Channel is shipped in a wooden crate. If you have also purchased

a Center stand, it is shipped in a separate cardboard box. Upon receiving the crate (and

cardboard box), please check their condition. If there is any damage, please report it to the

shipping company immediately for insurance verification.

The following items are recommended for this procedure:

• Supplied hardware kit

• Tape measure

• Known listening position

• Electric screwdriver

• Phillips head drive bit or Phillips head screwdriver

Uncrating the WATCH Center

Gently lift the Center channel out of the crate. Remove the plastic outer bag. Inven-

tory the crate contents. Move the Center channel into the desired location.

Note: Do not cut the bag off of the Center channel. By using scissors or a knife, you

could unintentionally damage the paint surface or a driving element. Keep the bag in

case you need to repackage the Center channel. Likewise, save your shipping crates and

all packing materials. They are specifically designed to prevent harm from coming to

your WATCH Center.

Note: Be careful not to touch the driver elements when you are moving your Center

channel.

S E C T I O N 2 . 1 — U N C R A T I N G T H E W A T C H C E N T E R C H A N N E LW A T C H C E N T E R C H A N N E L S E R I E S 3 O W N E R ’ S M A N U A L

18 19

Wilson Audio Specialties