Instruction Manual

height, it will need to be raised more in the back so the speaker is firing down toward the
listener.
After determining the required rotation for the Center channel, Sections 4.3-4.6, as-
semble the spikes as follows:
Assembly
1. Back out the setscrews on the bottom of the enclosure to the desired height
(see Figure 7) . Make sure the Allen key end is accessible.
2. If required, place the corresponding number of spacer discs over the bolt.
3. Screw the acoustical diode onto the bolt until it is roughly halfway into the
diode.
4. Screw the spike (with nut) all the way in until it just touches the bolt. Do not
tighten the nut at this time.
5. Repeat steps 14 with the other spikes.
Section 4.3—Measured Listening Position
Room Setup
The Center channel allows for different listening distances (away from the speakers)
and listening ear heights (measured distances from the floor up to your ear); see Figure 8
below. Propagation Delay Correction accuracy of the Center channel has been established
and verified at Wilson Audio’s R&D laboratory. The tables outlining the settings for adjust-
ments are in Section 10 of this owner’s manual. The correction tables used in this section
are a result of this testing. For each distance/ear height combination there is a unique
alignment geometry. To make correct in-home setup of the Center channel possible with-
out test equipment, Wilson Audio has measured the correct geometric PDC (phase delay
correction) alignment for different distance/ear height combinations. By measuring the ear
height and the distance from the speaker to the listening position, you will be able to align
the system for your listening position.
OPTIONAL SPACER
2 INCH
SETSCREW
2 SPACERS
OPT IO N 1
OPT IO N 2
(1-2 S
PACERS)
FI GU RE 8 CEN TE R CHA NNEL SPIKE S ASS EM BLY DI AGRAM
NUT
ALLEN KEY END
OF SETSCREW
DIODE
SPIKE
(NO SPACERS)
3/4 INCH
SETSCREW
S E C T I O N 4 . 3 M E A S U R E D L I S T E N I N G P O S I T I O NW A T C H C E N T E R C H A N N E L S E R I E S 3 O W N E R S M A N U A L
42 43
Wilson Audio Specialties
Wilson Audio Specialties