Specifications

ManualsBrandsWilson Electronics ManualsTelephone271245

Amplifier Kit

Amplifier

Kit

Installation

ide

stallatio

stallat

Mobile Wireless

Ampliﬁ er Kit with

Phone Cradle

Contents:

Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · · · 1

How it Works · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2

Before Getting Started · · · · · · · · · · · · · · · · · · · · · · · · · · 3

Installing the Magnet-Mount Antenna · · · · · · · · · · · · · · · 4

Installing the Ampliﬁ er · · · · · · · · · · · · · · · · · · · · · · · · · · 5

Installing the Cradle Plus · · · · · · · · · · · · · · · · · · · · · · · · 5

Powering Up a Wilson Ampliﬁ er · · · · · · · · · · · · · · · · · · · 7

Connecting the Earbud · · · · · · · · · · · · · · · · · · · · · · · · · · 7

Warnings and Recommendations · · · · · · · · · · · · · · · · · 8

Understanding the Ampliﬁ er Lights · · · · · · · · · · · · · · · · 9

About Wilson Electronics · · · · · · · · · · · · · · · · · · · · · · · 10

Ampliﬁ er Speciﬁ cations · · · · · · · · · · · · · · · · · · Back Cover

Wilson

Electronics, Inc.

Warning: This manual contains

important safety and operating information.

Please read and follow the instructions

in this manual. Failure to do so could be

hazardous and result in damage to your

ampliﬁ er.

Summary of content (12 pages)

PAGE 1
Amplifier Kit Installation stallat stallatio Guide Mobile Wireless Amplifier Kit with Phone Cradle Contents: Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · · · 1 How it Works · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2 Before Getting Started · · · · · · · · · · · · · · · · · · · · · · · · · · 3 Installing the Magnet-Mount Antenna · · · · · · · · · · · · · · · 4 Installing the Amplifier · · · · · · · · · · · · · · · · · · · · · · · · · · 5 Installing the Cradle
PAGE 2
30-Day Money-Back Guarantee All Wilson Electronics products are protected by Wilson’s 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. 1-Year Warranty Wilson Electronics amplifiers are warranted for one (1) year against defects in workmanship and / or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.
PAGE 3
Installation Instructions for the Following Wilson Amplifier: Mobile Wireless Dual-Band Amplifier Model # 271245 Part # 801213 FCC ID: PWO8012SM IC: 4726A-8012SM The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met.
PAGE 4
Before Getting Started This guide will help you properly install Wilson’s Mobile Wireless Amplifier Kit with Phone Cradle. It is important to read through all of the installation instructions for this kit prior to installing any of the equipment. Read through this installation guide, visualize where all of the parts will be installed, and do a soft installation before mounting any equipment.
PAGE 5
Installing the Magnet-Mount Antenna To receive the best cell signal, select a location in the center of the vehicle’s roof that is 12 inches away from any other antennas and free of obstructions. ! Warning: Do not use any type of glassmount antenna with this amplifier. The outside antenna and Cradle Plus must be shielded from each other to prevent oscillation. The outside antenna must be installed vertically. Signal performance will be degraded if the antenna is not vertical.
PAGE 6
Installing a Wilson Amplifier ! Warning: Do not plug in the DC power supply until the outside and inside antenna cables are attached to the amplifier. Select a location to install the amplifier that is away from excessive heat, direct sunlight or moisture and that has proper ventilation.
PAGE 7
Option 2 - Adhesive Bracket Clean the area where the bracket is to be mounted with rubbing alcohol and a soft cloth. Allow to dry. Peel the backing to expose the adhesive and press the bracket onto the desired location in the vehicle. Note: be sure the bracket is positioned vertically, not horizontally. Allow the adhesive to cure for 24 hours before you attach the cradle.
PAGE 8
Powering up a Wilson Amplifier Make sure both the outside antenna and Cradle Plus cables are connected before powering up the amplifier. Connect the power cable from the DC plug-in power supply to the amplifier marked “Power” and insert the large end into DC power socket (the cigarette lighter outlet.) Carefully insert the power cable. ! Warning: Use only the power supply provided in this package. The power supply must be 6 V DC. The amplifier may remain on all the time.
PAGE 9
Warnings and Recommendations Warning: Do not plug the amplifier directly into the cell phone or cellular data card using an antenna adapter. It will damage the cell phone or cellular data card. Warning: Do not plug in the DC power supply until the outside antenna and Cradle Plus cables are attached to the amplifier. Warning: RF Safety: The Cradle Plus must be installed with a separation of at least eight inches from all persons and must not be located in conjunction with any other antenna or amplifier.
PAGE 10
Understanding the Amplifier Lights The power light PWR will turn green when the amplifier is successfully powered up. When the 800 MHz or 1900 MHz lights are lit green, the amplifier is amplifying the outside signal. If one or both frequency lights turn red, oscillation is occurring and the amplifier has powered down. The outside antenna needs to be moved farther from the Cradle Plus.
PAGE 11
About Wilson Electronics Wilson Electronics, Inc. has been a leader in the wireless communications industry for nearly 40 years. The company designs and manufactures amplifiers, antennas and related components that significantly improve cellular telephone signal reception and transmission in a wide variety of applications, both mobile and in-building.
PAGE 12
Amplifier Specifications Dual Band 800/1900 MHz Specifications 271245 / 801201 FME-Male 50 ohms 5.6 x 3.6 x 1.7 inch or 14.2 x 9.1 x 4.4 cm 1.44 lbs or 0.