Installation guide

ManualsBrandsWilson Electronics ManualsTelephone271245

Amplifier Kit

Installation

Guide

Installation

MobileWireless

AmpliﬁerKitwith

PhoneCradle

Contents:

GuaranteeandWarranty∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 1

HowitWorks∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 2

BeforeGettingStarted∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3

InstallingtheMagnetMountAntenna∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4

InstallingtheAmpliﬁer∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5

InstallingtheCradlePlus∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5

PoweringUpaWilsonAmpliﬁer∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7

ConnectingtheEarbud∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7

WarningsandRecommendations∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 8

UnderstandingtheAmpliﬁerLights∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 9

AboutWilsonElectronics∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 10

AmpliﬁerSpeciﬁcations∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙BackCover

Warning:Thismanualcontains

importantsafetyandoperatinginformation.

Pleasereadandfollowtheinstructions

inthismanual.Failuretodosocouldbe

hazardousandresultindamagetoyour

ampliﬁer.

Summary of content (12 pages)

PAGE 1
Amplifier Kit Installation Guide Mobile Wireless Ampliﬁer Kit with Phone Cradle Contents: Guarantee and Warranty ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 1 How it Works ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 2 Before Getting Started ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 3 Installing the MagnetMount Antenna ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 4 Installing the Ampliﬁer ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 5 Installing the Cradle Plus ∙ ∙ ∙ ∙ ∙ ∙ ∙
PAGE 2
30Day MoneyBack Guarantee All Wilson Electronics products are protected by Wilson’s 30day moneyback guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. 1Year Warranty Wilson Electronics ampliﬁers are warranted for one (1) year against defects in workmanship and / or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.
PAGE 3
Installation Instructions for the Following Wilson Ampliﬁer: Mobile Wireless DualBand Ampliﬁer Model # 271245 Part # 801213 FCC ID: PWO8012SM IC: 4726A8012SM The term “IC” before the radio certiﬁcation number only signiﬁes that Industry Canada technical speciﬁcations were met.
PAGE 4
Before Getting Started This guide will help you properly install Wilson’s Mobile Wireless Ampliﬁer Kit with Phone Cradle. It is important to read through all of the installation instructions for this kit prior to installing any of the equipment. Read through this installation guide, visualize where all of the parts will be installed, and do a soft installation before mounting any equipment.
PAGE 5
Installing the MagnetMount Antenna To receive the best cell signal, select a location in the center of the vehicle’s roof that is 12 inches away from any other antennas and free of obstructions. ! Warning: Do not use any type of glass mount antenna with this ampliﬁer. The outside antenna and Cradle Plus must be shielded from each other to prevent oscillation. The outside antenna must be installed vertically. Signal performance will be degraded if the antenna is not vertical.
PAGE 6
Installing a Wilson Ampliﬁer ! Warning: Do not plug in the DC power supply until the outside and inside antenna cables are attached to the ampliﬁer. Select a location to install the ampliﬁer that is away from excessive heat, direct sunlight or moisture and that has proper ventilation.
PAGE 7
Option 2 Adhesive Bracket Clean the area where the bracket is to be mounted with rubbing alcohol and a soft cloth. Allow to dry. Peel the backing to expose the adhesive and press the bracket onto the desired location in the vehicle. Note: be sure the bracket is positioned vertically, not horizontally. Allow the adhesive to cure for 24 hours before you attach the cradle.
PAGE 8
Powering up a Wilson Ampliﬁer Make sure both the outside antenna and Cradle Plus cables are connected before powering up the ampliﬁer. Connect the power cable from the DC plugin power supply to the ampliﬁer marked “Power” and insert the large end into DC power socket (the cigarette lighter outlet.) Carefully insert the power cable. ! Warning: Use only the power supply provided in this package. The power supply must be 6 V DC. The ampliﬁer may remain on all the time.
PAGE 9
Warnings and Recommendations Warning: Do not plug the ampliﬁer directly into the cell phone or cellular data card using an antenna adapter. It will damage the cell phone or cellular data card. Warning: Do not plug in the DC power supply until the outside antenna and Cradle Plus cables are attached to the ampliﬁer. Warning: RF Safety: The Cradle Plus must be installed with a separation of at least eight inches from all persons and must not be located in conjunction with any other antenna or ampliﬁer.
PAGE 10
Understanding the Ampliﬁer Lights The power light PWR will turn green when the ampliﬁer is successfully powered up. When the 800 MHz or 1900 MHz lights are lit green, the ampliﬁer is amplifying the outside signal. If one or both frequency lights turn red, oscillation is occurring and the ampliﬁer has powered down. The outside antenna needs to be moved farther from the Cradle Plus.
PAGE 11
About Wilson Electronics Wilson Electronics, Inc. has been a leader in the wireless communications industry for nearly 40 years. The company designs and manufactures ampliﬁers, antennas and related components that signiﬁcantly improve cellular telephone signal reception and transmission in a wide variety of applications, both mobile and inbuilding.
PAGE 12
Ampliﬁer Speciﬁcations Dual Band 800/1900 MHz Speciﬁcations 271245 / 801201 FMEMale 50 ohms 5.6 x 3.6 x 1.7 inch or 14.2 x 9.1 x 4.4 cm 1.44 lbs or 0.