User's Manual

13
14
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [e-mail]. Hours: 7 am to 6 pm MST.
This Signal Booster is supplied
with separate uplink and
downlink gain controls. Note: All
gain controls should be set to
maximum. If you have a green
light, the installation is complete.
If the light is blinking
orange, the Signal Booster is
experiencing receiver overload.
Reduce the uplink (UL) gain
control, without reducing the
downlink (DL) gain to eliminate the
overload. This configuration will
eliminate cell tower interference
(overload) without reducing
coverage in the building.
Note: Reduce the downlink gain if the phone shows good signal strength
but can not make calls. This happens when the separation between the
uplink and downlink gains is too much.