User's Manual

1
2
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [e-mail]. Hours: 7 am to 6 pm MST.
Select a location to install the Signal Booster that is away 1.
from excessive heat, direct sunlight, moisture and has proper
ventilation. Do not place the Signal Booster in an air-tight
enclosure.
Select a location on the roof of the building to install the Outside 2.
Antenna. Use a cell phone in test mode to find the strongest
signal from the cell tower. Visit www.WilsonElectronics.com
to find test mode function for your particular cell phone (see
page 11).
Run the Outside Antenna cable to the Signal Booster and 3.
attach it to the connector labeled “Outside Antenna” on the
Signal Booster. Run the Inside Antenna cable to the Signal
Booster and attach it to the connector labeled “Inside Antenna”
on the Signal Booster (see page 7 for more information on
running cable). Lightning Surge Protection is recommended for
all in-building installations (see page 6).
Select a location for the Inside Antenna, preferably in the 4.
center of where the signal needs to be amplified. A minimum
separation distance (combined vertical/horizontal) of 20 feet is
necessary for operation (see page 8). If the inside coverage is
not sufficient you may need as much as 50 feet of separation.
See installation diagram on pages 3 & 4.
Before powering up the Signal Booster, verify that both the 5.
Outside Antenna and the Inside Antenna are connected and
check that all connections are tight. Note: Be careful when
plugging the connectors in so as not to bend the center pins
on the connectors.
The Signal Booster has been packaged with the gain control 6.
knobs adjusted to the highest gain position. If the light is not
green, please refer to pages 13 & 14.
Warning: 7. Connecting the Signal Booster directly to a cell phone
with use of an adapter may damage the cell phone and the
Signal Booster.
Quick Install Overview
See Installation Diagram on page 3. Contact Wilson Electronics
Technical Support Team with any questions at 866-294-1660.