User's Manual

7
8
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com. Hours: 7 am to 6 pm MST.
may be possible to run the cable up into the fascia of the attic
overhang. In this circumstance, the cable will be accessible in the
attic for further routing.
Ceiling
Rafters
Inside
Antenna
In some cases, multiple Inside Antennas may be required, for
instance if you have multiple rooms with poor signal. A signal may
be split by using a splitter (sold separately). If using more than
one Inside Antenna, a separation of at least 20 feet is necessary
between Inside Antennas. See configuration on pages 3 & 4.
Warning: An Inside Antenna must have a separation distance
from all persons that is at least 8 inches.
Installing the Inside Antenna
Find the desired location for the Inside Antenna (Panel Antenna
option shown). Verify that the Inside Antenna and the Outside
Antenna have the necessary separation (Minimum of 20 vertical/
horizontal feet if installed with Signal Booster set at a lower
gain, for maximum gain you may need as much as 50 feet of
separation). For optimum results the antenna should be mounted
at least 6 feet off the ground.
Splitter Options:
3-way
(859980)
4-way
(859981)
2-way
(859957)
(sold separately)