User's Manual

5
Select a location on the roof of the
building to install the outside antenna,
using a cell phone in test mode to fi nd
the strongest signal from the cell tower.
For test mode help, visit www.wilsonelectronics.com
or call Technical Support at 866-294-1660.
Installing a Wilson Outside Antenna
Follow the specifi c antenna
installation instructions included with
the outside antenna.
Lightning protection is recommended
for all in-building installations. Take
extreme care to ensure neither you
nor the antenna come in contact with
any electrical power lines.
A Yagi antenna must be installed
horizontally with the elements vertical
and the drip hole on the bottom.
Ensure there are three feet of
clearance in all directions surrounding
the antenna.
CORRECT
Cell Tower
RF Signal
Yagi External Antenna
Warning: The outside antenna must
be installed on an outdoor permanent structure
with a separation of at least 14 inches from all
persons during normal operation.
!
NOT
CORRECT
Warning: Never point the
front of the Yagi antenna toward
the inside antenna - oscillation will
result, causing amber light and gain
reduction.
!
Pointing toward
cell tower