User's Manual

1
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [e-mail]. Hours: 7 am to 6 pm MST.
2
Installation Instructions for the Following Wilson
Electronic Signal Booster:
Channelized 800 MHz Adjustable Gain
In-Building Wireless Smart Technology ™ Signal Booster
Model # 277180 FCC ID: PWO277180 IC: 4726A-277180
The term “IC” before the radio certification number only signifies that Industry Canada
technical specifications were met.
How it Works
Wilson Electronics Signal Boosters are bi-directional devices that deliver
service levels consistent with what would be expected in areas of high cell
network coverage. They amplify a weak or shadowed signal in mobile,
M2M, marine and in-building applications. When using a Wilson Electronics
Signal Booster in conjunction with Wilson Electronics antennas, the
outside antenna will collect the cell tower signal and send it through
the cable to the Signal Booster. The signal is then amplified and re-
transmitted through the Inside Antenna into the room. Cell phones and
cellular data cards in that area then communicate with the improved
signal. When a cell phone or cellular device transmits, the signal is
received by the Inside Antenna, amplified by the Signal Booster and
transmitted back to the cell tower through the Outside Antenna.
Inside this Package
Signal
Booster
AC/DC
Power
Supply
To purchase, call Wilson Electronics Sales Department at: 800-204-4104
We recommend using directional antennas with these boosters
Outdoor Antenna Options
Indoor Antenna Options & Accessories
1. 800 MHz Yagi Cellular Antenna (301129)
(Use with 807180)
2. Wide Band Directional Antenna 700 MHz -
2700 MHz (304411)
A. Wide-Band Panel Antenna 700-2700MHz (301135)
B. 50 Ohm Lightning Surge Protector N-Connector (859902)
Splitter options on page 3
2
1
B
A
Note: Kits may contain different accessories
Appearance of device and accessories may vary.