User's Manual
2
General
Your Wilson amplier has been carefully engineered to signicantly improve the performance of
your phone. Together with an outside antenna, the amplier’s state-of-the-art circuitry is designed to
increase your phones signal to and from the cell site, up to 20 times greater than the phone alone. The
U-Booster™ reduces disconnects and dropouts and increases data communication rates on 2G and 3G
networks.
How it Works
With the phone in the cradle and while using a wireless Bluetooth headset (or wired hands free device)
the outside antenna collects the cell tower signal and sends it through its cable to the amplier located
inside the cradle. The signal is then boosted by the amplier and sent to the phone via the built-in
antenna inside the cradle. When the phone transmits, the signal is picked up by the antenna inside the
cradle, boosted by the amplier and broadcast back to the cell tower via the outside antenna.
Before Getting Started
This guide will help you properly install the Wilson U-Booster
™
Dual-Band Wireless Amplier. It is important to read
through all of the installation steps prior to actual installation. If you do not understand the instructions contact
Wilson Technical Support at 866-294-1660.
Wiring Diagram
Provides power to both the
amplier and charging for
the phone
Various
mounting
options
available
Exterior
Antenna
Vehicle Installation
Exterior antenna
communicates
with cell site
Amplier boosts
signal to and from
cell site
Provides power to both the
amplier and charging for
the phone with the correct
optional charging cable
Accessory Power Supply, Antenna Mounting ,Cradle Moutning and Charging Cable Options
To order accessory items please call 800-204-4104 or visit www.wilsonelectronics.com