Installation Guide

ENTERPRISE 4300 & 4300R IN-BUILDING CELL SIGNAL AMPLIFIER
7
A red light indicates a band has
been shut down because of a severe
oscillation condition or repeated
oscillation. Reposition antennas
(increase separation between indoor and
outdoor antennas, and point in opposite
directions) and then reboot (turn the unit
o & on) the Enterprise 4300 & 4300R
system to reactivate the band and
maximize performance. When adequate
separation is achieved, the red light(s)
will return to green upon reboot.
Gray indicates band has been disabled.
(MENU SYSTEM cont.)