Parts List/Tune Up Info

October 30, 2020
FEDERAL COMMUNICATIONS COMMISSION
Authorization and Evaluation Division
7435 Oakland Mills Road
Columbia, MD 21046
Subject: Tuning and Adjustment of Wilson Model 460065 Signal Booster
Model 460065 Signal Booster
Tuned Frequency
(MHz)
Target
Gain (dB)
Maximum Gain
(dB)
Target Power
(dBm)
Maximum Power
(dBm)
Uplink
698-716
58.7
58.7
24.3
24.3
777-787
56.7
56.7
23.0
23.0
Downlink
728-746
59.8
59.8
11.7
11.7
746-756
61.8
61.8
12.9
12.9
There are no external tuning adjustments. The amplifier is factory set to not exceed maximum gains,
power levels, and downlink dependent region (RSSI) set points as provided in the test results. It is
designed with advanced internal programming, which allows it to automatically adjust for a variety of
conditions, while still amplifying weak signals.
Tune-up Procedure:
1. Once the antennas and antenna cables are connected, turn the unit on by connecting the
power supply cord, at the bottom. A Wilson Lightning Surge Protector is recommended for all
building installations. Make sure the protector is installed outside the building. Connect it to
suitable ground and in line, between the Outside Antenna and the Signal Amplifier.