Parts List/Tune Up Info

October 19, 2020
FEDERAL COMMUNICATIONS COMMISSION
Authorization and Evaluation Division
7435 Oakland Mills Road
Columbia, MD 21046
Subject: Tuning and Adjustment of Wilson Model 460066 Signal Booster
Model 460066 Signal Booster
Tuned Frequency
(MHz)
Target
Gain (dB)
Maximum Gain
(dB)
Target Power
(dBm)
Maximum Power
(dBm)
Uplink
698-716
57.0
57.0
23.3
23.3
777-787
58.5
58.5
22.2
22.2
824-849
57.9
57.9
23.3
23.3
1710-1785
64.7
64.7
22.1
22.1
1850-1910
63.7
63.7
21.8
21.8
Downlink
728-746
55.0
55.0
9.4
9.4
746-756
57.8
57.8
9.6
9.6
869-894
57.3
57.3
7.0
7.0
1930-1990
66.9
66.9
13.8
13.8
2110-2155
66.1
66.1
11.8
11.8
There are no external tuning adjustments. The amplifier is factory set to not exceed maximum gains,
power levels, and downlink dependent region (RSSI) set points as provided in the test results. It is
designed with advanced internal programming, which allows it to automatically adjust for a variety of
conditions, while still amplifying weak signals.
Tune-up Procedure:
1. Once the antennas and antenna cables are connected, turn the unit on by connecting the
power supply cord, at the bottom. A Wilson Lightning Surge Protector is recommended for all
building installations. Make sure the protector is installed outside the building. Connect it to
suitable ground and in line, between the Outside Antenna and the Signal Amplifier.