Specifications

5
Contact Wilson Electronics’s Technical Support Team with any questions at 866-294-1660
Or email: [e-mail] Hours: 7am to 6 pm MST.
6
Contact Wilson Electronics’s Technical Support Team with any questions at 866-294-1660
Or email: [e-mail] Hours: 7am to 6 pm MST.
About Wilson Electronics
Wilson Electronics, Inc. has been a leader in the wireless communications industry for over
40 years. The company designs and manufactures Signal Boosters, antennas and related
components that significantly improve cell phone signal reception and transmission in a
wide variety of applications, both mobile, M2M and in-building.
With extensive experience in antenna and Signal Booster research and design, the
company’s engineering team uses a state-of-the-art testing laboratory, including an
anechoic chamber and network analyzers, to fine-tune antenna designs and performance.
For its Signal Boosters, Wilson Electronics uses a double electrically insulated RF
enclosure and cell tower simulators for compliance testing.
Wilson Electronics Signal Boosters feature patent-pending Smart Technology
™
that
enables them to automatically adjust their power based on cell tower requirements. By
detecting and preventing oscillation (feedback), signal overload and interference with other
users, these Smart Technology ™ Signal Boosters improve network cell phone areas
without compromising carrier systems.
All products are engineered and assembled in the company’s 55,000-square-foot
headquarters in St. George, Utah. Wilson Electronics has product dealers in all 50 states
as well as in countries around the world.
30-Day Money-Back Guarantee
All Wilson Electronics products are protected by Wilson Electronics 30-day money-
back guarantee. If for any reason the performance of any product is not acceptable,
simply return the product directly to the reseller with a dated proof of purchase.
1-Year Warranty
Wilson Electronics Signal Boosters are warranted for one (1) year against defects
in workmanship and/or materials. Warranty cases may be resolved by returning the
product directly to the reseller with a dated proof of purchase.
Signal Boosters may also be returned directly to the manufacturer at the consumer’s
expense, with a dated proof of purchase and a Returned Material Authorization (RMA)
number supplied by Wilson Electronics. Wilson Electronics shall, at its option, either
repair or replace the product. Wilson Electronics will pay for delivery of the repaired
or replaced product back to the original consumer within the continental U.S..
This warranty does not apply to any Signal Boosters determined by Wilson Electronics
to have been subjected to misuse, abuse, neglect, or mishandling that alters or
damages physical or electronic properties.
RMA numbers may be obtained by phoning Technical Support at 866-294-1660.
Disclaimer: The information provided by Wilson Electronics, Inc. is believed to be
complete and accurate. However, no responsibility is assumed by Wilson Electronics,
Inc. for any business or personal losses arising from its use, or for any infringements of
patents or other rights of third parties that may result from its use.
Copyright © 2011 Wilson Electronics, Inc. All rights reserved.
This device complies with Part 15 of FCC rules. The transaction is subject to two
conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. Changes or modifi cations not expressly approved by Wilson Electronics could
void the authority to operate this equipment.
One or more of the following U.S. Patent numbers may apply to the Signal Booster in this
product – D596,614; D596,615; D563,381;7,729,669; 7,486,929; 7,729,656; 7,409,186;
7,783,318; 7,684,838; 12,714,994.
NOTE: The aluminum casing of a Wilson Signal Booster will adjust very quickly to the
ambient temperature of its environment. For example, in the summer, when the inside
of a car can reach 140 degrees Fahrenheit, the Signal Booster temperature may be 150
degrees or higher. The casing will be hot to the touch, similar to a metal door handle or a
steering wheel. Such high temperatures will not damage the Signal Booster, nor do they
pose a fire risk to the vehicle. As recommended in these instructions, install the Signal
Booster in a location with adequate ventilation, such as under the seat or under the
dashboard. Keep the area free of items that could block air flow to the Signal Booster.
Warnings and Recommendations
Warning: In a wireless installation, do not plug the Signal Booster directly into the cell
phone or cellular data card using an antenna adapter. It will damage the
Signal Booster, cell phone or cellular data card.
Warning: Do not plug in the DC power supply until the Outside and Inside Antenna
cables are attached to the Signal Booster.
Warning: RF Safety: The Inside Antenna must be installed with a separation of at least
8 inches from all persons and must not be located in conjunction with any
other antenna or Signal Booster.
Warning: RF Safety: The Outside Antenna must be installed with a separation of at
least 20 inches from any of the vehicle’s occupants or nearby persons and
must not be located or operating in conjunction with any other antenna or
Signal Booster. All roof mount antennas should be centrally located on the
roof of the vehicle. Mirror-mount antennas should be mounted as high above
the roof line as possible and leave at least 20 inches of separation from any
persons near or around the vehicle.
Warning: Use only the power supply provided in this package. The power supply must
be 6 V DC Output.