Specifications

1
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: [e-mail]. Hours: 7 am to 6 pm MST.
Welcome to the Wilson Electronics Family of Products!
Thank you for purchasing the Wilson Electronics SIGNALBOOST DT system. You are just minutes away from
enjoying improved performance from your cellular phone and/or laptop data card. When installed properly, the
SIGNALBOOST DT will significantly reduce dropped calls and improve both voice and data signal quality. By
taking a few minutes to read and follow the simple instructions in this guide, you will get the most out of your
new SIGNALBOOST DT system. If you have questions during or after installation, please do not hesitate to
contact a member of our Technical Support team by phone [phone] or 435-673-5021 or email
[e-mail]. We are here to help!
Before Getting Started
This guide will help you properly install a Wilson Electronics SIGNALBOOST DT. It is recommended that
you read through all of the installation steps and familiarize yourself with the product. Read the
instructions and visualize where you want to place the components before mounting any equipment. Please
contact Wilson Electronics Technical Support with any questions at 866-294-1660 or 435-673-5021.
Package Contents:
SIGNALBOOST DT
Cradle Antenna
(Mount outside on pole, wall, or
inside on a rafter or a window)
AC Power
Supply
(Sold Separately
with some models.)
Coax Cables
(20 and 30 feet)
2. Wall Mount
(Packet B)
1. Pole Mount
(Packet A)
Tools Required for Installation:
Depending on your particular installation, you will need the following tools:
1. Pole mount - 1/4 inch open-end wrench or adjustable wrench
2. Wall mount or Rafter mount - Drill and 3/16 inch bit, Phillips-head screwdriver
3. Window mount - Exacto knife
Cable
Connector
Desktop
Antenna
3. Window Mount
(Packet C)
Installation Instructions For The Following Wilson Electronics Signal Booster:
SIGNALBOOST™ DT Adjustable Gain Cellular/PCS Signal Booster
Model # 271265
FCC ID: PWO271265 IC: 4726A-271265
The term “IC” before the radio certification number signifies that Industry Canada technical specifications were
met.
Accessories packaged may not exactly match the below photos due to different kit options