Specifications

5
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [e-mail] Hours: 7 am to 6 pm MST.
6
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [e-mail] Hours: 7 am to 6 pm MST.
Warnings and Recommendations
Warning: Verify that both the Outside Antenna and the adapter extension cable are
connected to the Signal Booster before powering up the Signal Booster.
Warning: Use only the power supply provided in this package. Use of a non-WIlson
Electronics products may damage your equipment.
Warning: RF Safety: All omni-directional antennas shown on page 1 must be
installed so that the distance from the antenna to any person is no less
than 8 inches. All Yagi antennas shown on page 1 must be installed
so that the distance from the antenna to any person is no less than 26
inches. Yagi antennas may not be used indoors or in a mobile installation.
Please contact Wilson Electronics Technical Support Team for safe
distances from other antennas.
Lightning protection is recommended for all in-building installations.
It is recommended to verify that outside building antenna installations comply with relevant
electrical codes (e.g. National Electrical Code).
NOTE: The aluminum casing of a Wilson Electronics Signal Booster will adjust very quickly
to the ambient temperature of its environment. For example, in the summer, when the
inside of a car can reach 140 degrees Fahrenheit, the Signal Booster temperature may be
150 degrees or higher. The casing will be hot to the touch, similar to a metal door handle or
a steering wheel. Such high temperatures will not damage the Signal Booster, nor do they
pose a fire risk to the structure. As recommended in these instructions, install the Signal
Booster in a location with adequate ventilation. Keep the area free of items that could block
air flow to the Signal Booster. Do not install the Signal Booster in direct sunlight.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. Changes or modifications made that are not expressly approved by Wilson
Electronics could void authority to operate this equipment.
About Wilson Electronics
Wilson Electronics, Inc. has been a leader in the wireless communications industry for over
40 years. The company designs and manufactures Signal Boosters, antennas and related
components that significantly improve cellular telephone signal reception and transmission
in a wide variety of applications, mobile, in-building, and M2M.
With extensive experience in antenna and Signal Booster research and design, the
company’s engineering team uses a state-of-the-art testing laboratory, including an
anechoic chamber and network analyzers, to fine-tune antenna designs and performance.
For its Signal Boosters, Wilson Electronics uses a double electrically insulated RF
enclosure and cell tower simulators for compliance testing.
Disclaimer: The information provided by Wilson Electronics, Inc. is believed to
be complete and accurate. However, no responsibility is assumed by Wilson
Electronics, Inc. for any business or personal losses arising from its use, or for any
infringements of patents or other rights of third parties that may result from its use.
Copyright © 2011 Wilson Electronics, Inc. All rights reserved.
One or more of the following U.S. Patent numbers may apply to the Signal Booster in this
product – D596,614; D596,615; D563,381;7,729,669; 7,486,929; 7,729,656; 7,409,186;
7,783,318; 7,684,838; 12,714,994.
Wilson Electronics Signal Boosters feature patented Smart Technology™ that enables
them to automatically adjust their power based on cell tower requirements. By detecting
and preventing oscillation feedback, signal overload and interference with other users,
these Smart Technology™ Signal Boosters improve network cell phone areas without
compromising carrier systems.
All products are engineered and assembled in the company’s 55,000-square-foot
headquarters in St. George, Utah. Wilson Electronics has product dealers in all 50 states
as well as in countries around the world.
30-Day Money-Back Guarantee
All Wilson Electronics products are protected by Wilson Electronic’s 30-day money-back guarantee. If
for any reason the performance of any product is not acceptable, simply return the product directly to the
reseller with a dated proof of purchase.
1-Year Warranty
Wilson Electronics Signal Boosters are warranted for one (1) year against defects in workmanship and/
or materials. Warranty cases may be resolved by returning the product directly to the reseller with a
dated proof of purchase.
Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with
a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by Wilson
Electronics. Wilson Electronics shall, at its option, either repair or replace the product. Wilson Electronics
will pay for delivery of the repaired or replaced product back to the original consumer if located within
the continental U.S.
This warranty does not apply to any Signal Boosters determined by Wilson Electronics to have been
subjected to misuse, abuse, neglect, or mishandling that alters or damages physical or electronic
properties.
RMA numbers may be obtained by phoning Technical Support at 866-294-1660.