Operating Guide

5
Postforming
Type 350
Unbonded 60 35
General Purpose
Type 107
Bonded with contact
adhesive to
particleboard
substrate; 3/8”
40 100
Vertical Surface
Type 335
Bonded with contact
adhesive to
particleboard
substrate;
3/8”
40 155
Product Type Test Condition Flame Spread Smoke Developed
Postforming
Type 350
Bonded with contact
adhesive to
particleboard
substrate;
3/8”
50 140
When you wish to specify decorative laminate for a Class I or A fire rating, please refer to the Fire-
Rated Laminate Tech Data.
Model Code Designations used to determine flame spread classification
Flame Spread
Classification
(Max. Rating)
International
(IBC)
Life Safety
(NFPA 101)
25 A A
75 B B
200 C C
(RE: Architectural Woodwork Quality Standard, 8
th
Edition, Version 1.0, - 2003)
All Model Codes regulate the generation of smoke by interior finish material. In all cases they specify
a maximum smoke development rating of 450.
Codes and Certifications
General Standards
Wilsonart laminates conform to the voluntary standards of the American National Standards
Institute/National Electrical Manufacturers Association (ANSI/NEMA) LD3-2005, for thickness,
performance properties and appearance. Various grades of Wilsonart laminates meet or exceed the
International Standards Organization specifications as found in ISO 4586, titled “High-Pressure
Decorative Laminate (HPDL) – Sheets Based on Thermosetting Resins – Part I: specifications.”
The GREENGUARD Environmental Institute™ has awarded its GREENGUARD Indoor Air Quality
Certification to Wilsonart Laminate. All Wilsonart Laminate product types were tested under the
stringent GREENGUARD Standards for low-emitting products. All GREENGUARD Indoor Air Quality
Certified
®
products ensure minimal impact on the indoor environment. For a copy of the certificate,
visit www.greenguard.org
.
Specific Product Standards
U.S. Federal Specification L-P 508H, April 9, 1977, “Plastic Sheets, Laminated, Decorative and
Nondecorative.” Spells out criteria for decorative laminates for federal installations. Wilsonart 107,
335 and 350 laminates comply.
NSF International (NSF) #35, “Laminated Plastic for Surfacing for Food Service Equipment.” All solid
colors and printed patterns in Basic Types 107, 335 and 350, comply.