Operating Guide

8
For further assistance or questions, contact Wilsonart at the address or telephone number listed above
or at www.wilsonart.com.
Maintenance*
The decorative surface may be cleaned with warm water and mild soaps, such as those used for
hands or dishes. Do not use cleansers that contain abrasives, acids or alkalis; they will damage the
decorative surface. Remove stubborn stains with a 2-minute exposure to hypochlorite bleach such as
Clorox, followed by a clean water rinse.
We recommend that you not allow any of the following agents to remain in contact with the decorative
surface:
1. Hypochlorite bleach, except as described above
2. Hydrogen peroxide solution
3. Mineral acids, hydrochloric acid such as Lime-A-Way, sulfuric or nitric acid
4. Caustic solutions containing greater than 2% lye, such as Drano
5. Sodium bisulfate, such as Sani-Flush
6. Potassium permanganate
7. Berry juices
8. Silver nitrate, in 1% concentration or greater
9. Gentian violet
10. Mild silver protein, such as 20% argyrol
11. Bluing
12. Fabric dye, such as Tintex or Rit
13. Alcohol containing 1% iodine in solution
If you require a decorative laminate that can withstand these and other chemicals, please refer
to the Tech Data for Wilsonart Chemsurf Chemical-Resistant Laminates.
Free copies of the “Care and Maintenance Guide,” which covers all Wilsonart products, are available.
The guide can be accessed at http://www.wilsonartlaminate.com
or by calling our hotline at 800-433-
3222. It can be used for your own information, for project manuals, and for provision to clients and
contractors involved with interior construction and finishing.
*Not applicable for Phenolic Laminate Backing Sheet.
Technical Services
For samples, literature, questions or technical assistance, please contact our toll-free Hotline at (800)
433-3222, Monday through Friday, 7 am – 7 pm, CST.