Specification

Table Of Contents
Guide Specification
C. Fire-Rated Backer Sheet:Wilsonart Type 266-FR.” Use in conjunction with [“Wilsonart
Type 605 Fire-Rated Laminate”] [“Wilsonart Type 607 Fire-Rated Laminate”]. Class
A rated according to NFPA 101.
1. Sheet Thickness: 0.050 inch nominal.
2. Laminate Conformance Standard: NEMA LD 3, Grade BKH.
3. Color: Brown (natural color).
2.15 DECORATIVE EDGES AND EDGEBANDS
A. Decorative Edge Products: Wilsonart
®
Decorative Edges.”
1. Beveled Edge, [FE Profile.] [SE Profile.]
2. Cascade Edge, [FE Profile.] [SE Profile.]
3. Crescent Edge, [FE Profile.] [SE Profile.]
4. Color, Pattern, and Finish: [______________________].
5. Color, Pattern, and Finish: Specified in SCHEDULE Article of this Section.
6. Color, Pattern, and Finish: Indicated on Drawings.
7. Color, Pattern, and Finish: Selected from manufacturer's full range of available
selections.
B. Edgeband Products: “Wilsonart
®
Edgeband.”
1. Composition: ABS/PVC extruded fabrication.
2. Width: [15/16 inch] [1-5/16 inch].
3. Thickness: Refer to Tech Data Sheet.
4. Color, Pattern, and Finish: [______________________].
5. Color, Pattern, and Finish: Specified in SCHEDULE Article of this Section.
6. Color, Pattern, and Finish: Indicated on Drawings.
7. Color, Pattern, and Finish: Selected from manufacturer's full range of available
selections.
2.16 ACCESSORY MATERIALS
A. Contact Adhesive:
1. Product: Wilsonart 1730/1731 Low VOC Contact Adhesive.
2. Description: High solids, low VOC contact adhesive for non-postforming
applications.
EDITING NOTE: Select from the following edge designs.
EDITING NOTE: Following contact adhesives are UL GREENGUARD Gold Certified, quality
for LEED points, and comply with referenced SCAQMD and OTC regulations. For the
complete line of Wilsonart
®
Contact adhesives, refer to the Adhesives product link on the
Wilsonart website.
Section 06 0620 - 15
Decorative Plastic Laminate