Instructions / Assembly

Take care to ensure appropriate acclimation has taken place with the laminate and the substrate

prior to fabrication. The face and backing laminates and the substrate should be conditioned in the

same environment for 48 hours before fabrication.

Recommended conditioning temperature is about 75°F (24°C). Laminates should be conditioned at

45% to 55% relative humidity.

With postforming machinery, Wilsonart HD Laminate Type 376 will postform at a nominal sheet

temperature range of 325°F to 338°F (163°C to 170°C) in 20 ± 5 seconds.

Carbide-tipped saw and router blades should be used for cutting. High tool speed and low feed speed

are advisable. Cutting blades should be kept sharp. Use a hold-down to prevent any vibration.

5. Warranty

6. Maintenance

7. Technical Services

For samples, literature, questions or technical assistance, please contact our toll-free Hotline at (800)

433-3222, Monday through Friday, 8 am – 5 pm, CST.

Specification Form:

Surface shall be Wilsonart

High Definition

Laminate, produced by Wilsonart LLC,

Temple, Texas 76503-6110

Type: 376

Surface

Color Number: ______________ Color Name: ______________

Finish

Number: 35, 45 or 55

Name: Mirage, Facet or Glaze

Edge Trim

Color Number: ______________ Color Name: ______________

Adhesive

Name: ______________ Grade/Type: ______________

Brand: Wilsonart® Adhesive

Wilsonart



High Definition® HD® Laminate Technical Data

Revised: October 8, 2018