Manualshelf

Instructions / Assembly

ManualsBrandsWilsonart ManualsCountertops4 ft. x 8 ft. Laminate Sheet in Guava with Virtual Design Matte Finish
12345
Copyright 2017, Wilsonart LLC 3
3. Technical Data
Physical Properties of Vertical Surface Laminates (VDL)
ISO 4586 Test
Typical Wilsonart
Type 362/367
Thickness
0.028” + 0.001 - 0.004”
(0.7mm + 0.03 - 0.10mm)
N/A
Appearance
No ABC def. N/A
Light Resistance
Slight effect Slight effect
Cleanability (cycles)
10 20 (max.)
Stain Resistance
Reagents 1-10
Reagents 11-15
No effect
Slight effect
No effect
Moderate effect
Boiling Water Resistance
No effect
High Temperature
Resistance
Slight effect
Slight Effect (Gloss)
No Effect (Other Finishes)
Impact Resistance
40” (1016mm)
Radiant Heat Resistance
120 seconds > 200 sec.
Dimensional Stability
Machine Direction
Cross Direction
0.5%
0.8%
1.1% (max.)
Surface Wear Resistance
(cycles)
Meets or Exceeds 400 350 (min.)
Formability
*1/2” radius (13mm)
Blistering
45 seconds
*Radius for face is actually the radius of the form around which the laminate is postformed.
Physical Properties of Postforming Laminate (VDL)
ISO 4586 Test
Typical Wilsonart
Type 372/377
Thickness
0.039” ± 0.005”
(0.99mm
±
0.13mm)
(1mm
0.12mm)
Appearance
No ABC def. No ABC def.
Light Resistance
Slight effect Slight effect
Cleanability (cycles)
10 20
Stain Resistance
Reagents 1-10
Reagents 11-15
No effect
Slight effect
No effect
Moderate effect
Boiling Water Resistance
No effect
High Temperature
Resistance
Slight effect
Slight Effect (Gloss)
No Effect (Other Finishes)
Impact Resistance
55” (1397mm) 31.5” (800mm)
Radiant Heat Resistance
140 seconds > 200 sec.
Dimensional Stability
Machine Direction
Cross Direction
0.5%
0.8%
1.1% (max.)
Surface Wear Resistance
(cycles)
Meets or Exceeds 400 350 (min.)
Formability*
*5/8” face (16.00mm)
Blistering
70 seconds
*Radius for face is actually the radius of the form around which the laminate is postformed.