Operating Instructions & Service Parts Manual All Terrain Vise # 10010 Record purchase information for quick reference: WILTON 427 New Sanford Road LaVergne, Tennessee 37086 Ph.: 800-274-6848 www.wiltontools.com Manual No.
Warranty and Service JET, Wilton and Powermatic warrants every product they sell against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty lasts for the time period specified in the literature included with your product or on the official JET, Wilton or Powermatic branded websites.
Read and understand the entire owner's manual before attempting installation or operation. Warnings 1. Keep hands clear of jaws. 2. Make sure vise is properly secured to hitch receiver. If using accessory bench receiver, vise must be properly secured within receiver, and receiver bolted to bench with appropriate fasteners (not included). 3. Do not use the vise as a step; it may cause an individual to slip and fall. This caution is also inscribed in the anvil of the vise – see Figure 1. 4.
19. Provide for adequate space surrounding work area and sufficient lighting. 20. Do not use this tool while tired or under the influence of drugs, alcohol or medication. 21. Keep bystanders, especially children, away from the area while using the vise. 22. Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are careless acts that can result in serious injury. 23. Maintain a balanced stance at all times. Do not overreach while performing the work.
Installing to bench/table Setup and assembly Bench or table must be capable of supporting combined weight of vise, workpiece and applied forces. If additional strength is needed, mount supporting boards beneath the table. Read and understand all instructions and warnings in this manual before attempting installation or operation of hitch vise. Failure to comply may cause serious injury. Refer to Figures 3 and 4. 1. Position vise on bench.
To operate the hitch vise: Adjustments and Operation 1. Turn screw handle counterclockwise to open jaws. Do not try to force jaws apart farther than the rated capacity/jaw opening. Before use, inspect the vise for cracks, misalignment, binding, or any other problems that may compromise its safe use. 2. Choose the straight jaws or pipe jaws. Insert workpiece and turn handle clockwise to close jaws. 3. Tighten enough that workpiece can no longer be shifted within the jaws.
WILTON All Terrain Vise #10010 – Exploded View WILTON All Terrain Vise #10010 – Parts List Index No Part No Description Size Qty ..................... ATV-HA ................... Handle Assembly (index #1-5) ....................... .................................................... 1 1 ................... ATV-01 .................... Cap ............................................................... .................................................... 1 2 ................... ATV-02 ...................
427 New Sanford Road LaVergne, Tennessee 37086 Phone: 800-274-6848 www.wiltontools.